Urgent! need help!!

jrsimon27 · Nov 2, 2009, 03:29 PM

i was trying to upload a flash from another evo9 to my evo9 the thing is that i flashed the car know the car wont start what do i do?
i tried burning the oem.hex file back to the car but it gives me an error to see the log file?
i need help

thanks guys

**MR Turco** · Nov 2, 2009, 03:37 PM

Did you pull the stock rom first? Did you copy over the immobilizer number?

jrsimon27 · Nov 2, 2009, 03:41 PM

Quote:

Originally Posted by MR Turco

Did you pull the stock rom first? Did you copy over the immobilizer number?

mrturco i pulled the stock rom first i have it saved the thing is that i didnt copy over the immobilizer number know what do i do?

jrsimon27 · Nov 2, 2009, 03:43 PM

iam know copying the inmbolizer code but the thing is that ecuflash says an error has occured when i try to burn it back to the ecu?

**MR Turco** · Nov 2, 2009, 03:47 PM

is the battery dead from trying to start it too many times? Try to jump the battery from a running car, wait 5 minutes and try to write the rom again.

jrsimon27 · Nov 2, 2009, 03:49 PM

mr turco the battery is ok
i will wait 5 min and i will burn up the oem.hex
ok

**MR Turco** · Nov 2, 2009, 03:51 PM

Copy the text from ecuflash where it failed, in the log section on the right of the table list.

jrsimon27 · Nov 2, 2009, 03:54 PM

ok what i did right know was that i tried to read the rom in the ecu this is what it gave me:

[16:53:02.680] Using interface OpenPort 1.3 Mitsubishi TX35YQfo3484f6d5f39ef7d1fffefa8325ac762852c395e3
[16:53:05.135] sending init sequence 1 (0001)
[16:53:08.427] sending init sequence 1 (0003)
[16:53:11.718] sending init sequence 1 (FFFF)
[16:53:14.479] no response to any known code
[16:53:14.479] interface close

jrsimon27 · Nov 2, 2009, 03:58 PM

why wont it respond to any code i cant even read the new hex that i burned?

**MR Turco** · Nov 2, 2009, 04:08 PM

Battery isn't charged enough or the car isn't in the On position-not started

Fourdoor · Nov 2, 2009, 04:13 PM

Quote:

Originally Posted by MR Turco

Battery isn't charged enough or the car isn't in the On position-not started

If he has the wrong security code loaded, will the ECU even recognize that the key is in the on position? I thought that this was the great danger of just uploading someone else's ROM without changing the security code...

Keith

**MR Turco** · Nov 2, 2009, 04:14 PM

car wont start but you can flash as far as i know. the "great danger" is writing a rom over the stock rom without pulling it first which means you just wrote over the immobilizer code.

jrsimon27 · Nov 2, 2009, 04:15 PM

so what do you guys mean the battery is fulled up

which is the security code your talking about?

jrsimon27 · Nov 2, 2009, 04:16 PM

nope it wont flash nothing it wont even read the rom that i uploaded why is this??

KevinD · Nov 2, 2009, 04:19 PM

its because the battery is to low.... like people have been saying. throw a charger on it, turn off any stereo stuff and try again. if that doesn't help check your fuses. i've popped a fuse from turning a car off in the middle of a flash on accident.