Need Help, got error message while reading EVO 6 JDM ECU

[Stradale]

Hi Guys

Need Help with this problem. I Got Error Message while Reading EVO 6 JDM ECU using Ecuflash v 1.42 + Openport v2.0
The ECU no: MR 42043

This is the pic of the error message:


Can anybody help me how to solve the problem?

Thanks in advance

[evl08]

What does the log say?

[rolly1818]

make sure the car is warm prior to connecting to the ECU - dont know if its was coincidence but this stopped me once.

and make sure ur battery is fully charged people say that if its not it wont connect.

lastly, make sure the cable is connected properly and the ignition ON.

[Stradale]

Originally Posted by evl08

What does the log say?

To evl08: Ok, let me try to get the log detail message. Will update later. Thanks

To Rolly: Ok, I'll make sure to check everything. Thanks

[BarryC]

it looks like your init connector is not connected ???
are you sure the black op2 init connector is plugged into the white connector thats located on the wiring loom above the OBDII connector ???

[todd6027]

make sure both op2 connections are ok then download unlocker in thread below and try again .

need help guys!!

[todd6027]

snap fred

[Stradale]

Thanks ... but I have to wait my friend's car (evo 6) to come back

[evonut270]

do a screenshot of the entire page and post it.