TCSTigersClaw

Tephra means , ashes from the dead :P

Sometimes I think I am posting alone here no one is answering to me
Am I ...invisible ?

tephra

iTrader: (6)

I'm sure one of periphery bits controls that.. No idea which one, I think mrfred worked it out

TCSTigersClaw

Thanks ! I did it exactly like my Ori ! Anyway I will figure it out mr Tephra !

unihappytime

Any chance of 90550001 v7 with SD in the near future?

Floppyz

Hallo everybody,
I hope my question will not be off topic, but I'd like to know if is it possible to improove NLTS with a dedicate timeing retard, so it could be something like "bang" for keep turbo spool high.

As you know keeping youre engine WOT at rev limiter the turbo pressure do not reach higher pressure than 0,5 bar. I think it could be great if the timeing could be taken to negative value wihle NLTS in working. It would be great to reach almost 1 bar durin the lift change gera.

What do you think about it?

bay.
Filippo

romogst

iTrader: (14)

I converted my car to speed density mechanically and now ready to have my tuner put in a map for speed density and tune the car which will be sometime at the end of this month i'm hoping, he hasn't given me a date yet.
Yesterday i've downloaded the map that is currently into my ecu 88590015. (Evo 9 se)
Until my tuner sends me a base map can I upload one of the SD base from this forum maps just to start the car and have it Idling checking fuel pressure and such things. I wont be driving the car until he's ready to tune my car but I just want to throw in a SD base map to check things out.
Which is the correct SD base map for my 88590015 ?

1000cc injectors, omni 4 bar sensor, stock turbo
Thanks.

211Ratsbud

iTrader: (1)

I don't think this would help much. If you bounce more than one time in between shifts it's been too long anyways. The time it takes boost to build back up is pretty negligable considering you didn't lift. Basically I don't think anyone will jump all over that amount of recoding for such little gain


The proper rom id for 2d sd will be 88591715 or 3d sd 88592715. You will likely need some tuning just to get the car running period. Typically it won't fire and run perfectly especially when using a non stock injector size.

TheBigD

iTrader: (10)

hello i downloaded ROM 94171715 option 3. and everytime i try to open my tune. this happens!



i have no idea why the little "+" are gone and i cant open the tables.

ive converted a few other roms to speed density and it worked just fine.

is there error in the download or error in the file? or am i just missing something

DvlInDskyz

iTrader: (14)

Maybe make sure that you have the "TepheraMOD - 94170715-v7.xml" is unziped and all the files are in the correct locations from the main zipped file you downloaded. I believe that 94171715 looks for the include 94170715. Hopefully this helps. ???

TheBigD

iTrader: (10)

Yupp unzipped. And I've tried it with the tephra mod files put into the "evo" folder in ecuflash. And I've also tried manually opening them in notepad and copying the data to the original rom file. (Of coarse removing the factory data out of the OG RoM first)

And both times it'll open the tune but won't let me open any tables :/

todd6027

iTrader: (10)

prob needs the original 9417 xml and 7 base xml aswell

DRF78E

Hey Mate,

Just sent you a donation for the Evo7 maps cheers

mavraolan

I am looking to try tephra v7 on evo 9 jdm. Is there anyone who modify 88570008 into tephra v7?

todd6027

iTrader: (10)

not done yet but theres a v5.10 tephra mods + sd

bjmauck

iTrader: (3)

Hey guys I want to go SD with fuel temp. I downloaded 88590715 option 3. What do I have to change to run fuel temp instead of air temp? Is it already set up for fuel temp?