I closed the other thread and started this as the OP was no longer active on EvoM. Please PM me with any thread link addition ideas. I want this to be as complete and useful as possible for all of us.
**********ECU WIKI PAGE**********
ROM Patches:
Latest Tephra Patch:
TephraMod V7
tephra mod v7 - tephra
Legacy (EOL) Tephra Patches:
TephraMOD V5.10
tephra mod v5.10 - tephra
PATCH: NLTS + Valet + KnockCEL
PATCH: NLTS + Valet + KnockCEL by Tephra
96940011 05 EVOVIII ROM: Known Patches
96940011 05 EVOVIII ROM: Known Patches
Additional ECU Features:
Speed Density
Links to jcsbanks' Speed Density patches
Speed Density patches - jcsbanks
Boost Control:
how-to: ECU-based direct boost control
Direct ECU boost control by mrfred
ECU boost control mods
Fine tuning Load based boost control to prevent weather based boost variation by mrfred
HOW TO - Control boost using ECUFLash and 3 port GM boost solenoid
HOW TO - Control boost using ECUFLash and 3 port GM boost solenoid - Evo_Kid
HOW TO - Control boost using ECUFLash and the stock boost solenoid
HOW TO - Control boost using ECUFLash and the stock boost solenoid - Evo_Kid
OBD/Emissions
Patch: Force OBD Inspection Pass (acamus, mrfred)
forced obd inspection pass - acamus & mrfred
How-To: EGR Removal VIII/IX (and charcoal/EVAP canister)
how to: egr/emissions system removal - fostytou
Disabling EGR and fuel pressure solenoids
disabling egr/fuel pressure solenoids - fostytou (Page 9/10 preliminary how to with pictures)
Raising Load Limits:
ECU ROM mod - double the "Fuel Cut Load Limit" range to 638
doubles fuel cut load limit - mrfred
Advanced Logging:
log boost with JDM MAP sensor (updated instructions)
JDMMAP sensor set-up by mrfred
how-to: Log AFR from the LC-1 w/o a serial cable
log afr from lc-1 w/o a serial cable - mrfred
Patch how-to: manifold air temperature logging
Manifold Air Temp Logging - mrfred
94170008 ROM 2 byte load mod for dummies (like me :)
94170008 ROM 2 byte load mod for dummies (like me
by A418t81
Evo IX 2-byte Load & Lean Spool for Dummies
Evo IX 2-byte Load & Lean Spool for Dummies by Pd1
log WGDC in EvoScan
log WGDC in EvoScan - mrfred (good info on solenoid TBEC)
AEM UEGO logging help
Troubleshooting AEM UEGO wideband logging issues - tips and tech info
Tuning Tips and Tricks:
How To's
How To Tune an Evo
How to Tune an Evo by nj1266
Training Videos: How to tune an Evo with EcuFlash
Visual Training - How To: Tune an evo with Ecuflash - recompile
Evo 8/9 ECU pins, pin removal & installation, and map switching harness how-to's
ecu pin removal/installation/map switching harness how to - mrfred
Virtual Dyno Simulator
Virtual Dyno Room-Dyno Simulator
Virtual Dyno Room Simulator - jack of trades
Injector Tuning
Injector Scaling and Latency (SUPERMERGE)
Consolidated info from Fast Freddie
Lean Spool Tuning
Tuning with LS enabled
lean spool tuning - appauldd
Advanced Tuning
Official 2 byte thread!
official 2 byte load w/ mut address - jack of trades
ECUflash tutorial for beginners
ECUflash tutorial for beginners - EFIxMR
Knock control - load vs RPM table found
Knock control - load vs RPM table found - jcsbanks
Injector scaling and latecy for different injectors.
Injector Scaling by various members
Tutorial: How to scale your MAF [pics]
MAF Scaling by SophieSleeps
MIVEC tuning
Mivec Tuning by John Bradley the mivec guru (Page 10 and on are more useful information)
Advanced ECU Development
[Dev/Disassembly] The beginners' guide to Evo ECU table lookups
beginners guide to ecu table lookups - advanced material - logic & many more
Again, any additional links that you think should be here PM me or post in this thread.
