Going back to single disc setup instead of twin what will i need?

[BoostWhore]

I bought my car w a carbonetics twin in it. Im going back to a act single what will I need im thinking the rod for the slave cylinder.
Flywheel and maybe flywheel bolts and pressure plate bolts or do they come with the clutch kit?

Before anyone flames why I would go back to a single, I cannot stand the noise created by the twin disc, and I do not drag race the car.

[precisionpsi9]

you goin to need the rod for the slave, pressure plate bolts (6), throw-out bearing, i dont know if they toke the springs out in the trans for the folk (2) they r two different part # too. that about it i think i just switch from carbon clutch to act to and that what i needed

[tien]

My QM is too much for street driving, i will most likely switch back to a single disk or something smoother in the near future.

[BoostWhore]

Mine still uses the stock fork... not sure either.. do u have the part numbers for any of the stuff you had to get the pressure plate bolts and those springs? thanks

[kijima]

We've had good success with the Ralliart 1,245kg pressure plate and standard clutch disc.