Evovin's first on 10's....but not satisfied!

[evovin]

I ran the Evo yesterday at IFO in Montgomery.

Best et 10.90@129mph (race gas but misfiring)

Best trap 135mph (race gas but misfiring) et was 11.06

Best trap on pump gas was 131mph

Best 60ft 1.58

Mark @ TTR did a quick tune(via emal) @39psi but goes down to 36-37psi due to my leaking TB shaft seal Timing are also low. Tune was very conservative and AFR was 10.98-11.04 all the way on top.

Shop ran out of VP C16 so I used Sunnoco 116 octane and forgot to mention it to Mark. This was the reason why I was misfiring according to Mark/Keith.

Tire pressure was 11psi Front and 12psi Rear. It was very hard to control launching it. My 2 step was 7400 and making 28-30psi boost. I keep missing gears also don't know if its because my clutch was getting hot from the hard launch.

Ill post vid later. Pics for now!

Thanks to my sponsor:
TurboTrix Racing
SparkTech Ignitions and special thanks to Jim Indy Evo

Thanks to Pcola guys for helping out at the track too.













crew before leaving our town . BTW we drove 190 miles to the track!






(iPhone pics only)

[LOVEBOOOST]

Glad to see u got into the 10s but sucks u had a misfire hope ya get it taken care of and maybe get them times in the mid 10s

[IHUNTV8]

Car looks good! Sucks about misfire!


I just picked up a set of those Mazda Rims for my ET streets! Thats what i am going to run on the street with our new project car! They look good polished!!

Good luck getting everything squared away!

[Fathouse]

What spacers are those in the front? Do you have to do anything for the rear? Man I want a set of those rims and tires.

Fathouse

[Advanap1]

Congrats on the 10's. Gotta post up some vids.

Love the pic with the crew. Pretty sick lookin' crew with the R8, M3, and two red Evo's. Did they run too? If so, what times?

Like the clown driver in the red IX.

[evovin]

Project kics 20mm its light. No need for the rear.

[4G63 T]

looks like Kics spacers...low 10s next time?

[evovin]

Hope so! lol
Mark is retuning me when he comes down here next month.

[warp9]

Congrats on the new times! Those RX7 rims will work but they will scuff the top edge of the stock Brembos. Real close fit

[evovin]

Originally Posted by warp9

Congrats on the new times! Those RX7 rims will work but they will scuff the top edge of the stock Brembos. Real close fit

nope! I did scuff it at first but just found out that they have a diff off set. Make sure that the ones say #50 in the rims goes to your front and the ones without #50 goes to the rear.

[Raif]

man I just wonder was I the first one to ever do the rx-7 wheels with stock brakes.

[CWiLL]

pmed back

[warp9]

Originally Posted by Raif

man I just wonder was I the first one to ever do the rx-7 wheels with stock brakes.

True!

[gpintoevo9]

first.. what size are those rims??..

how much do they weight?

and what is the size of that tire??

[Brokenevo]

thats awesome man congrats