How to fit PnP IX + sensor

[teddysardjono]

Hi guys, I have a PnP IX and I want to fit it to my car,
and how to do air temp sensor + some loom sensor into my car?

Any helps would be appreciated..

And also anyone have base map for evo IX?

Thanks guys

[Bimmubishi]

The pin reference is in the manual. You need to hook the IAT to Pin 5 and 6 on the MAF. Obviously they have corresponding pins on the ECU but I don't know those offhand. It doesn't matter which pin goes to which.

Here is a picture from my files.

Pin 1 = +5 volts
Pin 2 = Barometer
Pin 3 = Airflow Hz
Pin 4 = +12 Volts from MPI
Pin 5 = Ground
Pin 6 = Intake Air Temp
Pin 7 = Reset


You might have asked that on the Autronic Forum (the above was my answer on that forum)