PDA

View Full Version : Stock I/C piping w/ Alky injection

Evo_Kid
Dec 20, 2005, 08:40 PM
Do you have to get an aftermarket I/C piping when you get alky injection or can you just use your stock I/C piping??

Thanks
Ultimate CC
Dec 20, 2005, 11:29 PM
You can use stock IC piping for alky
fromWRXtoEVO
Dec 21, 2005, 11:25 PM
I agree, you can use the stock IC pipes
sleet
Dec 22, 2005, 12:12 AM
I just hope those T-bolt clamps are gonna be able to hold 25psi+ without popping off.
Ultimate CC
Dec 22, 2005, 05:38 AM
Yea thats where it starts becoming a problem but I have seen a couple people running them so I guess it works ok
Ryu123
Dec 22, 2005, 05:48 AM
It'll certainly work with the stock pipe but I think ideally you want the nozzle as close to the TB as possible. I installed the Injen CAI on mine when I install my alky.
SlowCar
Dec 22, 2005, 07:44 AM
It'll certainly work with the stock pipe but I think ideally you want the nozzle as close to the TB as possible. I installed the Injen CAI on mine when I install my alky.
If you car using tha Hago MW nozzle, you want the nozzle a distance away from the TB.....generally 6 to 8" away to get good air/r-oh mist mixture.