Rear Diff and AYC bleed
Jan 9, 2012, 07:22 PM
#2
1) remove the rear wheels
2) unbolt some control arms so you can pry out the half-shafts connecting to the diff
3) unbolt the driveshaft connection
4) unbolt the AYC lines
5) rear diff is held by 3 bolts in plain site
6) remove it
AYC bleeding requires tephra's tool + service manual directions or going to mitsu. Check out this thread for info on the tephra-tool https://www.evolutionm.net/forums/ec...would-pay.html
2) unbolt some control arms so you can pry out the half-shafts connecting to the diff
3) unbolt the driveshaft connection
4) unbolt the AYC lines
5) rear diff is held by 3 bolts in plain site
6) remove it
AYC bleeding requires tephra's tool + service manual directions or going to mitsu. Check out this thread for info on the tephra-tool https://www.evolutionm.net/forums/ec...would-pay.html
Jan 23, 2012, 05:58 AM
#4
Evolving Member
Join Date: Sep 2008
Location: Chicago
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
1) remove the rear wheels
2) unbolt some control arms so you can pry out the half-shafts connecting to the diff
3) unbolt the driveshaft connection
4) unbolt the AYC lines
5) rear diff is held by 3 bolts in plain site
6) remove it
AYC bleeding requires tephra's tool + service manual directions or going to mitsu. Check out this thread for info on the tephra-tool https://www.evolutionm.net/forums/ec...would-pay.html
2) unbolt some control arms so you can pry out the half-shafts connecting to the diff
3) unbolt the driveshaft connection
4) unbolt the AYC lines
5) rear diff is held by 3 bolts in plain site
6) remove it
AYC bleeding requires tephra's tool + service manual directions or going to mitsu. Check out this thread for info on the tephra-tool https://www.evolutionm.net/forums/ec...would-pay.html
Jan 23, 2012, 08:32 AM
#5
Evolved Member
Thread Starter
iTrader: (1)
Join Date: Apr 2010
Location: Dayton, Ohio (WPAFB)
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
HA HA? what so funny? i asked before i did it. after doing it very easy. no need to bleed, used vac caps on hard lines to prevent total fluid lose.
Jan 23, 2012, 10:36 AM
#6
Newbie
Thread
Thread Starter
Forum
Replies
Last Post
tiesto14
Evo X General
17
Jun 4, 2016 03:51 AM
moey124
Evo Engine / Turbo / Drivetrain
5
May 21, 2016 11:15 AM
