**How to install the MAGNUS master cylinder upgrade**
#6
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Nov 2008
Location: Meridian, ID
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
It's up, when you install the L shaped piece your setting your pedal height.
Or are you talking about the slave and fork picture? If it looks funny its because the TOB isn't engaged yet.
Or are you talking about the slave and fork picture? If it looks funny its because the TOB isn't engaged yet.
Trending Topics
#8
EvoM Guru
iTrader: (6)
doing mine right now..
mine is RHD so its slightly different.. the original hard pipe is REALLY long and goes behind all the other hard pipes so I think its going to be bent when coming off oh well
first question, do you think a carbide grinder for a dremel will be enough to get those nubs off?
mine is RHD so its slightly different.. the original hard pipe is REALLY long and goes behind all the other hard pipes so I think its going to be bent when coming off oh well
first question, do you think a carbide grinder for a dremel will be enough to get those nubs off?
#15
EvoM Guru
iTrader: (6)
ok the bendy/wiggle method was a fail for me..
i just snapped the stud in half...
maybe they put extra effort on my spot welds haha
so now I have to remove my brake booster and drill the ****** out from the backside...
Hollywood - is it best to drain the brake master before unhooking the brake lines? or will veyr little fluid come out if I just unscrew them?
i just snapped the stud in half...
maybe they put extra effort on my spot welds haha
so now I have to remove my brake booster and drill the ****** out from the backside...
Hollywood - is it best to drain the brake master before unhooking the brake lines? or will veyr little fluid come out if I just unscrew them?