Console Lights All-In-One How-To
#1
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Console Lights All-In-One How-To
Okay boys (and girls) here we go. Everything you ever wanted to know about changing light bulbs, clock colour, dismantling your center console in one handy dandy thread.
Tools needed: nothing but a phillips (otherwise known as cross) screwdriver. Really. It's not as hard as you thought it was.
Let's begin.
Tools needed: nothing but a phillips (otherwise known as cross) screwdriver. Really. It's not as hard as you thought it was.
Let's begin.
#2
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Begin at the center box (armrest). Unscrew the two screws holding the box down, and pull the whole unit from the back up, releasing it from the two clips at the front.
#4
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Now to the left lower part, beside the pedals. Using your screwdriver, unscrew the plastic screw holding the panel in, and pry away the panel. It has tabs that attach it to the center console.
#7
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Once again, with the ingenious grommet, push your screwdriver head into the middle, and pop the piece out. You have now completely released the center console, and it should lift right out with the proper angles. If you drive auto, it helps to have your car in neutral at this point to help guide the console out.
Trending Topics
#15
Evolving Member
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
With the gauge cluster loose, pull it slightly out of its sitting place. Now on to the climate controls. Twist all knobs all the way to the left, this makes it easier to put them back in later. Simply pull them out.