ID2000 scaling and latency
#1
ID2000 scaling and latency
Updated (ECU map screenshot in post #7)---
I will get in more detail later tonight when I get the video up and pix of all the maps but here is the basics:
Gasoline- Shell 92
Scaling is 1624, latencies (very responsive) is:
9.38- .936
11.72- .672
14.06- .504
16.41- .384
My RPM VE table is low 90s in the idle section and the MAPVE is basically 1:1
Fuel pressure- stock 43.5psi
Idles on the O2 sensor which is a total departure from how this setup works on 160# or 1600s. I am really looking forward to getting my 2.2 in the car and really leaning on it. The idle is at 1.034msc just like Tony showed in the video and it is perfectly happy...maybe even better than the RC1000s that I just took out.
aaron
I will get in more detail later tonight when I get the video up and pix of all the maps but here is the basics:
Gasoline- Shell 92
Scaling is 1624, latencies (very responsive) is:
9.38- .936
11.72- .672
14.06- .504
16.41- .384
My RPM VE table is low 90s in the idle section and the MAPVE is basically 1:1
Fuel pressure- stock 43.5psi
Idles on the O2 sensor which is a total departure from how this setup works on 160# or 1600s. I am really looking forward to getting my 2.2 in the car and really leaning on it. The idle is at 1.034msc just like Tony showed in the video and it is perfectly happy...maybe even better than the RC1000s that I just took out.
aaron
Last edited by JohnBradley; Sep 16, 2009 at 03:36 PM.
#6
Tony1 got them to idle on a stock Integra LS so I didnt think we'd have any problems with a larger motor and larger cams. I havent done all the driveability but just moving around the neighborhood and the parking lot the car drives fine (14.7-15 with the O2 on). It starts up cold idles at 14.7 for about 15 seconds and then goes to low 12s till the O2 warms up and cycles and then idles like stock...with S2s.
These are so much better than the 1600s and 1680s I messed around with back in the day. I gave up and was only willing to spend time with those on E85 or E98 thinking that nothing large would ever idle right on gas. They barely idled right on E85.
Jens came out with the Bluemaxes and I was really impressed by how much better they were than the older style Bosch designs. I have heard the old style 1600s (NOT FIC BLUEMAXES) likened to firehoses since they werent ever designed to run anything other than CNG. I knew the ID1000s had potential and when Tony and ID announced 2000 (well 2245 at 43,5) I was ready
I sold my 1600s and 1000s, got these, will be getting a MagnaFuel 625 Pro Street pump and going back to E85 on 4 injectors instead of 8 with a piggyback.
Bryan I even did a video to show what they are doing in the car.
Jens came out with the Bluemaxes and I was really impressed by how much better they were than the older style Bosch designs. I have heard the old style 1600s (NOT FIC BLUEMAXES) likened to firehoses since they werent ever designed to run anything other than CNG. I knew the ID1000s had potential and when Tony and ID announced 2000 (well 2245 at 43,5) I was ready
I sold my 1600s and 1000s, got these, will be getting a MagnaFuel 625 Pro Street pump and going back to E85 on 4 injectors instead of 8 with a piggyback.
Bryan I even did a video to show what they are doing in the car.
Last edited by JohnBradley; Sep 21, 2009 at 03:56 PM.
Trending Topics
#15
It so happens that the latency ended up as close to identical to the 45psi latency settings that T1/ID ships with the injectors. I updated the tables as well, so the initial settings have changed.
Dave,
I want 4 injectors and 800whp+ capability on E85 Now for the big pump and the rest of the fuel system.