Took the restrictor pill out
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: Raleigh
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Took the restrictor pill out
and the clutch feels 100 times better. It now releases lower compare to sky the **** high like it use to, due to the pill. Is there a way to adjust the clutch pedal like on the 8/9?
Bleeding the clutch is much like bleeding the brakes. Hook the bleeder valve to a bleeder house/catch can. Pump the clutch a few times and have someone push and hold it all the way down. Then loose the bleeder screw until you see fluid starting to come out though the line in to the catch can. Then tighten the bleeder screw back down. Next have your helper pump the clutch a few times and on the last time have them hold down the clutch all the way down. Open the bleeder screw again to release fluid in to the catch can. Keep doing this until you see nothing but fluid.
Pump the clutch.....hold it all the way down.... loosen bleeder screw.....watch fluid/air bubbles come out......tighten bleeder screw back down....repeat, until its nothing but fluid coming out (IE.. no air bubbles)
Bleeding the clutch is much like bleeding the brakes. Hook the bleeder valve to a bleeder house/catch can. Pump the clutch a few times and have someone push and hold it all the way down. Then loose the bleeder screw until you see fluid starting to come out though the line in to the catch can. Then tighten the bleeder screw back down. Next have your helper pump the clutch a few times and on the last time have them hold down the clutch all the way down. Open the bleeder screw again to release fluid in to the catch can. Keep doing this until you see nothing but fluid.
Pump the clutch.....hold it all the way down.... loosen bleeder screw.....watch fluid/air bubbles come out......tighten bleeder screw back down....repeat, until its nothing but fluid coming out (IE.. no air bubbles)
#5
Evolved Member
iTrader: (17)
to be honest, i've become used to it. not saying it won't be nice to have it lower (my old car engages immediately), but to have it so high is nice for beginners not used to hitting that engagement point.
in the end, it's about getting used to the car and what you prefer. i'm fine with it being high.
in the end, it's about getting used to the car and what you prefer. i'm fine with it being high.
#8
Evolved Member
iTrader: (3)
Bleeding the clutch is much like bleeding the brakes. Hook the bleeder valve to a bleeder house/catch can. Pump the clutch a few times and have someone push and hold it all the way down. Then loose the bleeder screw until you see fluid starting to come out though the line in to the catch can. Then tighten the bleeder screw back down. Next have your helper pump the clutch a few times and on the last time have them hold down the clutch all the way down. Open the bleeder screw again to release fluid in to the catch can. Keep doing this until you see nothing but fluid.
Pump the clutch.....hold it all the way down.... loosen bleeder screw.....watch fluid/air bubbles come out......tighten bleeder screw back down....repeat, until its nothing but fluid coming out (IE.. no air bubbles)
Pump the clutch.....hold it all the way down.... loosen bleeder screw.....watch fluid/air bubbles come out......tighten bleeder screw back down....repeat, until its nothing but fluid coming out (IE.. no air bubbles)
#9
Evolved Member
iTrader: (3)
Join Date: Dec 2005
Location: hmmmm
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
I don't always push the clutch pedal all the way in while shifting....
So, my question is, have you noticed now that you do have to press the clutch all the way in each time to shift?
So, my question is, have you noticed now that you do have to press the clutch all the way in each time to shift?
#11
Evolved Member
iTrader: (3)
Join Date: Dec 2005
Location: hmmmm
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the driving lesson, but that is incorrect. Nothing wrong with pushing the clutch in all the way each time, but there are advantages to not having to do so both on track and off....
#12
There may be advantages to not fully disengaging the clutch when you shift, but the disadvantage is you're going to wear the clutch prematurely. If you like to only slightly push the clutch in when shifting, why not leave it the way it is? It seems like that's exactly what you want.
#13
Evolved Member
iTrader: (3)
Join Date: Dec 2005
Location: hmmmm
Posts: 1,250
Likes: 0
Received 0 Likes
on
0 Posts
True, that's why I was asking, to get clarification.
About the premature wearing of the clutch, could be possible, but I did get over 70k miles on the IX stock clutch including several hard road course days.
About the premature wearing of the clutch, could be possible, but I did get over 70k miles on the IX stock clutch including several hard road course days.