Hopefully someone can shed some light on this for me.
I have the serial to port cable that goes to the blue wire on the uego and the other that goes to the ground.
That then plugs into the serial to usb wich in turn goes into the laptop.
Ok so here is the situation, I plug the usb in and it says windows doesent recognize the device, so i go ahead and put in the driver software and install it.
*When I go to the device manager it comes up as unknown device and I have no means of selecting the port.
*In Mitsulogger if i select AEM for wideband it opens a small window and asks me to select a port, and this port is used for the tactrix cable so it gives me an error when i try to log.
Ive tried to change the port for the tactrix cable and I can no problem but the wideband port selection then becomes whatever port i selected for the tactrix cable...
if i try to log w/out the wideband selection i have no problems but i need them to both work and its giving me trouble.
