Quote:
Originally Posted by MR Turco
Where is this version 7 patch? is it fully released?
|
No, not officially. Grab the V6 thread. Phenem posted 7.6 version roms with direct boost control xml mods and such in there. I just posted my own small thread because I needed some clarification on how some of this stuff worked.
Quote:
Originally Posted by fixem2
You need to change you base PSI. Look for the Boost Adder table, it is probably already set to 14.7 or so psi. The limit of the stock tables are 24.6 so you need to increase the boost adder to get higher boost.
Example: 14.7 = 1 ATM psi. So 24.6 is true boost. If you had 5 +14.7 = 19.7 (boost adder) then your 24.6 becomes 29.6.
|
So I'm at 1000ft. (997) So my boost adder would be 14.2. So say I add 5 = 19.2.
Now all my values in the BDEL table become 5psi higher? So 20psi now =25psi?
Basically the BDEL table has become my fuel table where the psi values become just "numbers".
I can deal with that. It sucks visually, but I just gained about 1000 rpm in spool up vs my broken mbc. So I'm not going to complain. 
__________________
Buschur 3" TBE no cat, Buschur deluxe FMIC & piping, HAFE GT3076R turbo kit, GM BCS, HKS 272's, Tial bov & 44WG, W255, FIC 850's, MaftPro, LMS meth kit, GTWorx springs, Bilstein HD's, ES bushings, AWD MS Alu D/S, Beatrush d/s bushings, Powerflex front & rear mount, ACT 2900 /street disc, Prolite flywheel, DBA 5000/4000 brakes, Goodridge, Motul. Emissions delete, all tuned with ecuflash!
-Dustin
Just PM me!
|