evolutionm.net - View Single Post - Converting to Speed Density on stock IX turbo

wshihdnevo · Jul 5, 2009, 12:13 PM

Lets just say I made the same hp I did on a 60 degree day w/ 20% humidity as I did on Thursday when it was 90+ w/ 50% humidity on less boost.

Putting a 4" intake together right now to purchase to see if there is any difference. I will prob get a baseline w/ my current intake again when I go and then put the new 4" intake on. I have been looking around and it looks like the FP DSM Aluminum 4" intake should work on stock appearing turbos too w/ a 2.5"-4.0" coupler reducer.

http://store.forcedperformance.net/m...ode=DSM-Intake

Jul 5, 2009, 12:13 PM	#14
wshihdnevo Evolved Member Personal Sales Rating: (40) Join Date: Dec 2006 Location: Tacoma Posts: 1,429 Drives: '05 apex silver evo 8	Lets just say I made the same hp I did on a 60 degree day w/ 20% humidity as I did on Thursday when it was 90+ w/ 50% humidity on less boost. Putting a 4" intake together right now to purchase to see if there is any difference. I will prob get a baseline w/ my current intake again when I go and then put the new 4" intake on. I have been looking around and it looks like the FP DSM Aluminum 4" intake should work on stock appearing turbos too w/ a 2.5"-4.0" coupler reducer. http://store.forcedperformance.net/m...ode=DSM-Intake __________________ Ported IX Turbo/Buddy Club 272/280/Magnus Street SMIM/Muse exhaust manifold/ETS Short Route UICP/LICP/4" MAFless intake/ETS 3.5" Exhaust/ETS 3" widetank fmic/Walbro 255/ACT HD/GM 3 port BCS/Speed Density on stock ECU MidgetSpec&English Racing ETS EDRCrew
Offline