i initially had the screen out but felt that was causing it. put the screen back in and the frequency of it happening decreased quite a bit. now without rhyme or reason it has gotten worse even with the screen in. i tried another maf with screen just to make sure i didn't have a failing maf but same result.
Quote:
Originally Posted by linuxman51
Screen still in the maf or no? I have a similar issue that wouldn't scale out and apparently won't tune out without causing an issue driving off... but mine didn't do it until I yanked the (mostly failing) screen out of the maf. I let off the gas and I can see the load spike 120 with the throttle closed, so I leaned that spot out at 1000rpms and 120 load, it made it better, but I still get stumbling reasonably frequently.
The problem becomes when you pull off from really low rpms it hits that spot on the map with it actually being in 'load' and goes really lean. I suspect I'm going to have to go to SD to fix it, but I'd really like to get mine tuned out 'normally' first.
|