|
A couple more question. I have a multi meter and will be testing all the voltage tonight because like someone suggested I think the gauges are not getting enough power.
STRI Instructions:
RED: 12 volt ignition on.
Black: Ground
Yellow: Light source 12v, Illumination
Green: Signal Wire
1. I assume that since the gauges light up correctly that there is no issue with the Yellow wire (12v light source), so I am thinking that there might be an issue with the Red Wire (12v ignition on) supplying enough power? Does that make sense?
2. Are both the red and yellow wires constant power sources?
3. Does it matter that all 3 gauges are drawing power from the same lines both Red and Yellow?
Everything is tapped into the radio harness. Thanks for all the help.
|