[D1no]

I ended up removing the stock batt. terminal and soldering a 4 ga. wire with spade terminal, to the positive cable. I left the diode piece intact. I cut up the red positive terminal cover, into a box shape. Covered the two soldered connections with this box and just wrapped it all up with good quality electrical tape. I then tucked it and zip tied it under the battery tray. 4 ga. from there to Stinger cable terminals. I did not like doing it like this, but it worked out great.

Four power wires, three 4 ga. and one 0ga. to the terminal just doesnt look good to me.

I think a distro. block somewhere, with just a single 0ga. to the bat. terminals would look cleaner.