|
Ok let me try to be a little more clear with this.
You dont want to connect it to a cigarette lighter "plug"
What you will need to do:
-Your going to have to pull that little ash tray out that is to the left of the lighter socket.
-Then you need to gain access to the wire that connects to the CENTER pin on this socket. There should be a little kind of connector that plugs into the back of the socket (you cant see this normally) its on the back side of the center console.
-There will also be a connector that clips to the outside or "lining" of the socket. This is chassis ground not +12VDC.
-So splice your blue REM wire to the wire/connector that goes to the center of the socket (again in the back) and plug the connector back in.
-Run this wire back to your amp under the center console and under the floor carpeting or mats if you dont feel like doing that. Avoid running power wire/cable and your RCA audio cable in parallel with each other or at least right next to each other. You could get extra noise and hums etc. Its just good practice to do this.
Let me know if something doesn't make sense.
-Ethan
EDIT: Oh btw the antenna wire does not have any actually voltage nor will it do anything to help your REM wire work properly. Unless its a power antenna which the evo doesn't have and even then it really wont help you. It would prob just turn on your amp until your antenna was fully extended then turn off.
|