evolutionm.net - View Single Post - Install a Whiteline KCA395 roll center correction kit on an Evo without a shop press

xtnct · May 30, 2009, 04:01 PM

Nice write up! Does anyone have Torque specs for all the bolts to put it all back together? The Whiteline instructions don't have the torque specs either.

1) Control Arm bottom bolt
2) Control Arm side bolt
3) Sway bar end link bolt
4) Ball joint bolt
5) Tie rod bolt

Edit. Started another thread and got the info. Adding link here for others: Torque specs for control arm bolts after RCA kit install

May 30, 2009, 04:01 PM	#4
xtnct Evolved Member Personal Sales Rating: (24) Join Date: Mar 2003 Location: PA Posts: 1,010	Nice write up! Does anyone have Torque specs for all the bolts to put it all back together? The Whiteline instructions don't have the torque specs either. 1) Control Arm bottom bolt 2) Control Arm side bolt 3) Sway bar end link bolt 4) Ball joint bolt 5) Tie rod bolt Edit. Started another thread and got the info. Adding link here for others: Torque specs for control arm bolts after RCA kit install Last edited by xtnct; May 30, 2009 at 06:54 PM.
Offline