View Single Post
Old Apr 6, 2009, 10:50 PM   #2
Xraycat
Newbie
Personal Sales Rating: (0)
 
Xraycat's Avatar
 
Join Date: Dec 2006
Location: Portland, OR
Posts: 52

Drives: 2003 Mitsubishi Evo8

Quote:
Originally Posted by Xearo View Post
Where do u guys run the power wire through the firewall at?

Also, how do u run the power wiere through the cabin? Under the door drim or under the seats, etc.
Do u run the RCAs at the same time? or do u run the rcas on the opposite side of the cabin?

Do u guys run speaker wire to the speaker or do u just cut te wire that goes to the head unit harness at tap into those wires from the amp?
There is various spots to run the amp wire (depends on the guage is were the recommended path you should take.)
You can run the power wire down the side just under the carpet, the rca's should stay a standard 18" away from the power to avoid induced noise.
And for getting the correct speaker wires to get, i would recommend getting an interface harness to avoid cutting the factory harness. If thats not possible then look up the colors online.
Offline
 
Reply With Quote