evolutionm.net - View Single Post

nothere · Feb 15, 2009, 03:41 PM

dudical26,

can I out put a signal from a dds3 through the Jack of Trades harness? I have the original dds3 from the "5" kit.
I was using a ground signal from the dds3 to trigger an ebc but now I am using the stock boost control and going to an alt map.

now I have a JOT alt map switch harness
I figure I can relay to the JOT switch going to 12v from the ground signal and then the JOT harness would fix the voltage to the ecu? Thus removing the switch out of the harness.
Is that clear? will it work?

Feb 15, 2009, 03:41 PM	#7
nothere Evolved Member Personal Sales Rating: (21) Join Date: Jan 2004 Location: Bellevue. WA Posts: 2,365 Drives: 05 element, 03 evo (mutating)	dudical26, can I out put a signal from a dds3 through the Jack of Trades harness? I have the original dds3 from the "5" kit. I was using a ground signal from the dds3 to trigger an ebc but now I am using the stock boost control and going to an alt map. now I have a JOT alt map switch harness I figure I can relay to the JOT switch going to 12v from the ground signal and then the JOT harness would fix the voltage to the ecu? Thus removing the switch out of the harness. Is that clear? will it work? __________________ now with led dome lights!!!!!
Offline