Quote:
Originally Posted by esevo
It wont be bad if he can get it to fully evaporate prior to the IC. Then it will only aid the cooling. BUT it has to be fully evaporated, a cold climate should not be a choice for this setup.
Use a small .4 jet and it should work...
OP what boost will you be running? Higher boost will aid evaporation as it causes higher charge temps.
Evan Smith
|
I don't totally agree. Check out a thread on the waterinjection.info board from a while back with charts showing the cooling effect of different jet locations.
Pre IC injectin, even with good evaporation.......the surface of the IC will cause the moist air to condense on the walls of the IC and reduce the effeciencey.