Quote:
Originally Posted by esevo
It wont be bad if he can get it to fully evaporate prior to the IC. Then it will only aid the cooling. BUT it has to be fully evaporated, a cold climate should not be a choice for this setup.
Use a small .4 jet and it should work...
OP what boost will you be running? Higher boost will aid evaporation as it causes higher charge temps.
Evan Smith
|
I'll be running 28 psi there and there abouts...
Quote:
Originally Posted by dudical26
Do I understand you correctly, you are putting a nozzle before the heat exchanger?
I wonder if that is the best idea, it may reduce the effeciency of the heat exchanger.
|
Yes Richard recomened before the heat exchange