|
170 psi is a lot of pressure and takes a while to build up... Kinda like a big turbo waits for spool. So response is kinda slow which could leave you dry. BUT allow better atomization. Which isnt as critical in a 100% meth kit like yours due to meths low viscosity vs a 50/50 or 100% H20 mixture.
Aquamist HFS-5 kit uses a shurflow pump preset at 130 psi. Great atomization for 50/50 yet plenty to flow above 2000cc a min!
The SMC controller I believe alters the voltage to the pump which can cause slow reaction time and a fulty pump after a while, might look into buying just a Hobb switch and a relay to power the pump. You will only get real precision with a HSV (High Speed Valve) from Aquamist. Acts like a fuel injector but for water/meth!
Good luck buddy lmk if you need anything!
Evan Smith
|