evolutionm.net - View Single Post - Flojet to Shurflo Pump- 200psi too much?

elhalisf · Nov 26, 2008, 02:54 PM

I originally had the smc front mount kit with the progressive controller and the flojet pump. I also have a 250 psi fuel pressure gauge/sensor, measuring methanol pressure going into the nozzle.

with the old pump, i was told that 100psi of methanol pressure is pressure.

now i installed the shurflo pump inplace of the flojet pump, as seen in the pictures below,

http://i226.photobucket.com/albums/d...alisf/smc1.jpg

http://i226.photobucket.com/albums/d...alisf/smc2.jpg

The lowest methanol psi i can get is around 170 psi, and if i place around with the controller switches, it can go upto 200+ psi.

Is that too much methanol pressure? what is everyone else getting with the shurflo pumps?

Nov 26, 2008, 02:54 PM	#1
elhalisf Evolved Member Personal Sales Rating: (116) Join Date: Apr 2005 Location: Avondale, AZ Posts: 1,130 Drives: 04 Evo 8	Flojet to Shurflo Pump- 200psi too much? I originally had the smc front mount kit with the progressive controller and the flojet pump. I also have a 250 psi fuel pressure gauge/sensor, measuring methanol pressure going into the nozzle. with the old pump, i was told that 100psi of methanol pressure is pressure. now i installed the shurflo pump inplace of the flojet pump, as seen in the pictures below, http://i226.photobucket.com/albums/d...alisf/smc1.jpg http://i226.photobucket.com/albums/d...alisf/smc2.jpg The lowest methanol psi i can get is around 170 psi, and if i place around with the controller switches, it can go upto 200+ psi. Is that too much methanol pressure? what is everyone else getting with the shurflo pumps? __________________ 9.0 wiseco/crower motor, FP green, PPI ported 10.5 hotside/exhaust/intake manifolds, PPI 65mm TB, S2 cams, SMC meth, intake, exhaust, ETS FMIC, O2 housing, Forge MBC. Tons of suspension mods!! Faisal (586) 610-2830
Offline