evolutionm.net - View Single Post

06MRV8Killer · Nov 21, 2008, 11:43 AM

Having the solenoid further away then 4-5 inches from the nozzle is not recommended due to the exact issue with left over meth in the line beinging pulled out of the line from vaccum, it will potentially cause starting and idling problems... My solenoid is about 3 inches from the nozzle.....

I run the same exact kit as you I think (M12 nozzle) with failsafes and had issues when I had solenoid tucked behind the fuse box to the right of the battery. I have a Fujita UICP and dont have corrosive damage... so check them out.

By your last post you mentioned that you were using washer fluid instead of meth right? (I know that it works if you get the right type, just havent spoken to anyone who actually uses, or used it)

Nov 21, 2008, 11:43 AM	#11
06MRV8Killer Evolved Member Personal Sales Rating: (5) Join Date: Apr 2007 Location: In front of a F'in computer! Posts: 1,077 Drives: A Money Pit	Having the solenoid further away then 4-5 inches from the nozzle is not recommended due to the exact issue with left over meth in the line beinging pulled out of the line from vaccum, it will potentially cause starting and idling problems... My solenoid is about 3 inches from the nozzle..... I run the same exact kit as you I think (M12 nozzle) with failsafes and had issues when I had solenoid tucked behind the fuse box to the right of the battery. I have a Fujita UICP and dont have corrosive damage... so check them out. By your last post you mentioned that you were using washer fluid instead of meth right? (I know that it works if you get the right type, just havent spoken to anyone who actually uses, or used it) __________________ ////// www.4WSTuning.com ////// Labonte ////// AMS ////// Blitz ////// Brailleauto ////// Exedy ////// Fujita ////// Forge ////// Greddy ////// HKS ////// Innovate //////Injen ////// Invidia ////// Last edited by 06MRV8Killer; Nov 21, 2008 at 11:49 AM.
Offline