evolutionm.net - View Single Post

Vigman · Nov 17, 2008, 01:18 AM

I have it in the 1-1/4" pipe between UICP and BOV...
I decided to install it here because it is not affecting air flow in main UICP...
I know it is relative measurement but since most of us have Tephra patch, it works good to get Temperature on regular map (no WI) and see when WI is ON (lower temp, but my nozzle is right after IC)...
The problem I found is that my sensor is not very reactive to pretend any serious analysis but if you want it just to verify both operations, it works.
Tell me if you want picts...
C>

Nov 17, 2008, 01:18 AM	#4
Vigman Evolving Member Personal Sales Rating: (0) Join Date: Mar 2007 Location: Mexico Posts: 295 Drives: EVO IX MR	I have it in the 1-1/4" pipe between UICP and BOV... I decided to install it here because it is not affecting air flow in main UICP... I know it is relative measurement but since most of us have Tephra patch, it works good to get Temperature on regular map (no WI) and see when WI is ON (lower temp, but my nozzle is right after IC)... The problem I found is that my sensor is not very reactive to pretend any serious analysis but if you want it just to verify both operations, it works. Tell me if you want picts... C> __________________ 6000 miles of happiness so far... Last edited by Vigman; Nov 17, 2008 at 01:24 AM.
Offline