Hi All of you,
After a long time working on it, I share you my HFS5 Install (Tephra mod)....
Special thanks to Tephra, Dudical26 and Jack of Trades for the inspiration...
Here we go with the tanks install...
Since It was time to work good, I take the shot to install an AFR @ the same time...
My choice regarding the DDS3 location is on the right tap (right door) to hide it but having it easy to adjust...
I decide to install nozzle right after the IC so I made a little trick on the pipe...
This is how it looks now...
My boost on WI is controlled with a solenoid + regulator
So there are 2reg: 1 for MBC on regular map (22PSI) and 1 for WI only open thru solenoid (28PSI).
Air box was a good place to make that easy...
And I also decide to wire others stuffs at the same time (flash jammer, iPod charger)
Here are my switches...with 2 leds to visualize map switching and failsafe window...
I tried to make everything thinking on failsafe window... here is my wiring (pict links to PDF file)
(probably the most useful on this thread!)
I used a dual gauge pod on the steering to have WI and AFR close to my eyes...
And this is the overview...
I first tried to use VTA but after fighting too much with stalling, I return recirculated now, even I know I will inject some water-alcohol on the turbo when BOV open but as I asked in
this thread , I think it should be ok...I let you know...
I will try to add some picts when classified!!
Now I am ready to start working on maps and since I am not very confident with my ECU work, I think to win some time working with Mellon...
I 'll let you know how this works soon...
Cheers,