Evo 8 Compression Test
#5
Evolved Member
iTrader: (8)
7. Crank the engine with the throttle valve fully open and
measure the compression pressure.
Standard value (at engine speed of 250 r/min): 1,128
kPa (163 psi)
Minimum limit (at engine speed of 250 r/min): 951 kPa
(138 psi)
8. Measure the compression pressure for all the cylinders, and
check that the pressure differences of the cylinders are
below the limit.
Limit: 98 kPa (14 psi)
9. If there is a cylinder with compression difference or a
compression difference that is outside the limit, pour a small
amount of engine oil through the spark plug hole, and repeat
the operations in steps 6 to 8.
(1) If the compression increases after oil is added, the cause
of the malfunction is a worn or damaged piston ring
and/or cylinder inner surface.
(2) If the compression does not rise after oil is added, the
cause is a burnt or defective valve seat, or pressure is
leaking from the gasket.
measure the compression pressure.
Standard value (at engine speed of 250 r/min): 1,128
kPa (163 psi)
Minimum limit (at engine speed of 250 r/min): 951 kPa
(138 psi)
8. Measure the compression pressure for all the cylinders, and
check that the pressure differences of the cylinders are
below the limit.
Limit: 98 kPa (14 psi)
9. If there is a cylinder with compression difference or a
compression difference that is outside the limit, pour a small
amount of engine oil through the spark plug hole, and repeat
the operations in steps 6 to 8.
(1) If the compression increases after oil is added, the cause
of the malfunction is a worn or damaged piston ring
and/or cylinder inner surface.
(2) If the compression does not rise after oil is added, the
cause is a burnt or defective valve seat, or pressure is
leaking from the gasket.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
slow5.0.
Other Cars - For Sale - Wanting To Buy (WTB) Or Trade (WTT)
24
Nov 18, 2010 04:08 AM
jasonrp15
For Sale/WTB - Engine / Drivetrain / Power
17
Apr 1, 2008 07:38 AM
Lancerzz
04-06 Lancer Ralliart Show & Shine
25
Mar 12, 2008 11:33 AM