lancer es speed sensor issue
Nov 1, 2007, 09:04 AM
#1
Newbie
Thread Starter
Join Date: Sep 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
lancer es speed sensor issue
hello guys,
i need to know if this part number is interchangable with the dodge neon speed sensor...
i can't find the mitsu part anywhere on the net or in the local car part shops...
MR331743
please advise if speed sensors from other models such as galant, diamante etc can also be used......
any help is appreciated
stealership quoted
$200+ with installation....
thanks..
Maniek
i need to know if this part number is interchangable with the dodge neon speed sensor...
i can't find the mitsu part anywhere on the net or in the local car part shops...
MR331743
please advise if speed sensors from other models such as galant, diamante etc can also be used......
any help is appreciated
stealership quoted
$200+ with installation....
thanks..
Maniek
Nov 1, 2007, 11:52 AM
#3
Newbie
Thread Starter
Join Date: Sep 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the prompt reply dude.... what happens is that the engine response is sluggish and the transmission jerks( unhooking and hooking the battery back up solves the problem for about 5 miles or so and then it's christmas again (cel).... i got a code 0715 when got it tested at autozone.... input speed/turbine sensor problem... checked all the wiring ... everything is in it's place... so the only thing left is the sensor... but i don't wanna go through the dealer.... they're dumb as !#@$# when i called them for a price quote they were guesstimating how much it would cost...i do need the sensor but from what i've heard is that dodge/chrysler/mitsu parts are interchangeable.... lemme know where i can get this or what is comparable....
Nov 1, 2007, 01:05 PM
#4
Evolved Member
iTrader: (10)
Join Date: Mar 2005
Location: Greenville, SC
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
5-sp or auto? Know anyone with a Lancer that would let you see if that was the issue? Meaning, a quick switch of the sensor and taking it for a spin? Not sure what other vehicle's sensor can work in it's place, but there proabably others out there. Parts/junk yard nearby? Give them a quick call to see what trannys they have in stock...if they even know.
Nov 1, 2007, 08:38 PM
#5
Evolving Member
iTrader: (3)
Join Date: May 2004
Location: Missouri
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Here...
http://www.mitsubishiparts.net/cart/...&submit=Search
That's assuming the part number you listed is correct. I didn't check it myself.
http://www.mitsubishiparts.net/cart/...&submit=Search
That's assuming the part number you listed is correct. I didn't check it myself.
Trending Topics
Nov 5, 2007, 02:31 PM
#11
Newbie
Thread Starter
Join Date: Sep 2006
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
i know that both speed sensors are on a transmission .... how do you know which one is which .... are there any manuals or something with diagrams that somone can share with me.... i would hate to take it to the dealer..... to get it done......
Nov 5, 2007, 07:34 PM
#12
Evolving Member
iTrader: (3)
Join Date: May 2004
Location: Missouri
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Well, for one thing, the input shaft speed sensor and the output shaft speed sensor look different. When you actually look at the two, you'll be able to tell. The input shaft sensor (the one you ordered) has the electrical connector pointing up, whereas the output shaft sensor has the connector pointing off to the side. These pictures should help. The one boxed in red the second picture is MR331743.
Last edited by Tech@SA573; Nov 7, 2007 at 06:26 AM.