Official Wheel/Tire Info Thread
#1
EvoM Staff Alumni
Thread Starter
iTrader: (88)
Join Date: Aug 2003
Location: Concord Township, Ohio
Posts: 8,733
Likes: 0
Received 3 Likes
on
3 Posts
Official Wheel/Tire Info Thread
All 2008 models
Lug pattern is 5x114.3
Lug nut thread/pitch - 12 x 1.5
Offset is 46mm.
Center hub is 67mm.
GTS
Stock tire size is 215/45/18
Stock tire is Dunlop SP Sport 5000 M
Wheel is 18x7
Weight of stock wheel/tire - 48 lbs. (as tested by gts_in_nj)
Weight of stock wheel - 23 lbs. (as tested by dsrttigr)
Weight of stock tire - 25 lbs. (by removing wheel weight from total weight)
DE
Stock tire size is 205/60/16
Stock tire is Yokohama AVID S34B
Wheel is 16x6.5
ES
Stock tire size is 205/60/16
Stock tire is Yokohama AVID S34B
Wheel is 16x6.5
General info
A 245/45/18 size tire will not fit, as confirmed by CrEsT (tested on 18x8 wheel). A 235-width tire will fit, however (see post #19 below).
A 16" wheel will fit on the GTS model. It is the smallest wheel that will fit, though.
--------------------------------------------------
Please post as more stats are found.
Lug pattern is 5x114.3
Lug nut thread/pitch - 12 x 1.5
Offset is 46mm.
Center hub is 67mm.
GTS
Stock tire size is 215/45/18
Stock tire is Dunlop SP Sport 5000 M
Wheel is 18x7
Weight of stock wheel/tire - 48 lbs. (as tested by gts_in_nj)
Weight of stock wheel - 23 lbs. (as tested by dsrttigr)
Weight of stock tire - 25 lbs. (by removing wheel weight from total weight)
DE
Stock tire size is 205/60/16
Stock tire is Yokohama AVID S34B
Wheel is 16x6.5
ES
Stock tire size is 205/60/16
Stock tire is Yokohama AVID S34B
Wheel is 16x6.5
General info
A 245/45/18 size tire will not fit, as confirmed by CrEsT (tested on 18x8 wheel). A 235-width tire will fit, however (see post #19 below).
A 16" wheel will fit on the GTS model. It is the smallest wheel that will fit, though.
Majority of 5x114.3 bolt pattern steelies with 67.1mm centre bore will fit. This was verified by a Canadian online tire dealer and TireRack. So most Honda and Mazda steelies will work. Some old Toyota jeeps might not, offset is not close. This info is mainly for people going to the scrap yards which will save you 50-75% of the cost of steelies. Most online shops do not have the info for 2008 models, and this is handy info. Mazda3 specific steelies are the same for the Lancer.
Please post as more stats are found.
Last edited by Blacksheepdj; Feb 24, 2008 at 03:35 PM. Reason: New post info
#3
Evolving Member
Join Date: Jun 2007
Location: Nanaimo BC Canada
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
I thought I would mention that a 235 tire WILL fit
local dealership has a set on a DE.. set of 17's .. looks like stock offset and 7inch width
they were 235/45/17 and they went right up to the edge of the fenders .. looked pretty good actually.
no chance to try and swing the wheel side to side to see if they rub.. but should work
local dealership has a set on a DE.. set of 17's .. looks like stock offset and 7inch width
they were 235/45/17 and they went right up to the edge of the fenders .. looked pretty good actually.
no chance to try and swing the wheel side to side to see if they rub.. but should work
#7
your sidewall will be bigger and your speedo will be off by a bout 5 mph (tooslow), gearing will be thrown off and fuel mileage will suffer, if you want less road noise= smaller wheel...keep your overall diameter (wheel+tire together) the same or close to stock unless you dont care about that stuff
Trending Topics
#8
Evolved Member
Join Date: Sep 2007
Location: Edmonton, Canada
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
Thought I would throw in this tire size calculator for folks wondering about replacing their stock tire with a different size.
http://www.discounttire.com/dtcs/infoTireMath.dos
http://www.discounttire.com/dtcs/infoTireMath.dos
#9
Newbie
Join Date: Jun 2007
Location: Winnipeg, MB, Canada
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Anybody know what the center bore size is on the stock wheels?
This would help others in wanting to buy other wheels. (I found a set of cheap RSX wheels, and am not sure if they'll fit).
This would help others in wanting to buy other wheels. (I found a set of cheap RSX wheels, and am not sure if they'll fit).
The following users liked this post:
LewisLancer (Jul 9, 2019)
#14
Well I wouldn't have to make the effort if I found out they didn't. Plus they are on another car, i was planning on buying a replacement for that car and using the present ones for the Lancer. Besides you can add it to your sticky on top I found the info. Majority of 5x114.3 bolt pattern steelies with 67.1mm centre bore will fit. This was verified by a canadian online tire dealer and tire rack. So most hondas and mazda steelies will work. Some old toyota jeeps might not, offset is not close. This info is mainly for people going to the scrap yards which will save you 50-75% of the cost of steelies. Most online shops due not have the info for 2008 models, and this is handy info. Mazda3 specific steelies are the same for the Lancer.
#15
so the GTS is 215/45/18. i know the 18 stands for the rim size (correct me if im wrong), will 215/45/17 snow chains work on this wheel? or will that -1 inch greatly affect it?
thanks! sorry if the answer is somewhere else, i searched it but i kept getting directed to oz forums
thanks! sorry if the answer is somewhere else, i searched it but i kept getting directed to oz forums