$5 o2 cheater/non fouler how-to
#1
Newbie
Thread Starter
Join Date: Apr 2005
Location: Santa Barbara(IV), CA/Stamford, CT
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
$5 o2 cheater/non fouler how-to
Available at your local automotive store. Spark Plug Non Fouler PN 42009 ($4.99)
You now need to drill out 1 of the non foulers using a 1/2" drill bit. When finished this is what it will look like.
Side by Side comparision of the orignal and now modified non foulers
o2 Sensor inserted in the modified non fouler
Second, unmodified non fouler now installed on modified non fouler
Original non fouler->Modified non fouler->o2 sensor
Fully installed
The idea behind it is when you remove the cat the 2nd o2 sensor is going to have too much crap reaching the sensor that isnt filtered out, which will make it think the cat has gone bad. What this does is it moves the o2 sensor further away so a limited amount of exhaust gets to the o2 sensor, it is a VERY little ammount that actually gets to the sensor but as long as it is considerably less than the primary o2 sensor then it wont cause a CEL.
from (http://www.k-series.com/forum/showthread.php?t=8833) pics rehosted by me incase the thread/pics disappear.
saw a few threads asking how to do it so i found it done w/ pics and decided to pass along the info
You now need to drill out 1 of the non foulers using a 1/2" drill bit. When finished this is what it will look like.
Side by Side comparision of the orignal and now modified non foulers
o2 Sensor inserted in the modified non fouler
Second, unmodified non fouler now installed on modified non fouler
Original non fouler->Modified non fouler->o2 sensor
Fully installed
The idea behind it is when you remove the cat the 2nd o2 sensor is going to have too much crap reaching the sensor that isnt filtered out, which will make it think the cat has gone bad. What this does is it moves the o2 sensor further away so a limited amount of exhaust gets to the o2 sensor, it is a VERY little ammount that actually gets to the sensor but as long as it is considerably less than the primary o2 sensor then it wont cause a CEL.
from (http://www.k-series.com/forum/showthread.php?t=8833) pics rehosted by me incase the thread/pics disappear.
saw a few threads asking how to do it so i found it done w/ pics and decided to pass along the info
#4
Newbie
Thread Starter
Join Date: Apr 2005
Location: Santa Barbara(IV), CA/Stamford, CT
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EvoIXMR
what part store did you buy it from?
i didn't buy it... it's not my write-up if you read it completely you would know that. and it's any parts store. autozone, pep boys, napa, kragen, CPK, etc. etc. just go to the counter and ask for the "spark plug non-fouler"
Originally Posted by kimletrim
Isn't there a How To on this already? But nice pics and writeup.
#5
Evolving Member
iTrader: (4)
Join Date: Aug 2005
Location: 61114
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
That is my write up I did a handful on years ago that I hosted on ephatch.com k-series.com i-vtec.net crsx.com and a handful of other Honda boards
I find it amazing how many forums my images/writeup has ended up on without any attempt to contact me before posting them.
I find it amazing how many forums my images/writeup has ended up on without any attempt to contact me before posting them.
#7
Newbie
iTrader: (1)
Join Date: Jan 2006
Location: Minnesota
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EnJaNir
That is my write up I did a handful on years ago that I hosted on ephatch.com k-series.com i-vtec.net crsx.com and a handful of other Honda boards
I find it amazing how many forums my images/writeup has ended up on without any attempt to contact me before posting them.
I find it amazing how many forums my images/writeup has ended up on without any attempt to contact me before posting them.
Trending Topics
#13
I followed these step exactly (well, based on some common sense and a 1/2 bit and a vice) and the conclution is...
I have now installed this quick fix and it worked! I went to get the codes pulled to erase them and I had 5, mosly from vacuum rerouting and emission. All gone and it didn't come back when I gave the ole lead foot. We shall see but this looks very promising...
I have now installed this quick fix and it worked! I went to get the codes pulled to erase them and I had 5, mosly from vacuum rerouting and emission. All gone and it didn't come back when I gave the ole lead foot. We shall see but this looks very promising...