Stock 09 Ralliart Suspension needed...

RallyDSM · Jun 7, 2009, 01:25 AM

Hey all,

My sponsor, AMR Engineering, is looking to purchase a set of stock Ralliart suspension components to spec out a new line of AMR Suspension components.

I run the stuff in my Rally Car and pretty much the entire team at English Racing is running it now on their street and drag cars... this stuff rocks.

Well under $2K, LIFETIME warranty with Free Rebuilds and the best handling you can get.

Be a part of bringing AMR to the 09 Ralliart... lend, sell or horse trade your stock suspension. Please contact me so I can get you the hook up.

All the best,

Scott

evil03 · Jun 8, 2009, 01:55 AM

what do you need exactly? pm me

RallyDSM · Jun 8, 2009, 08:52 AM

AMR Engineering is building a new set of Coil Overs for the 09 ralliart and like every other set they build, they design every component specific to the application... shaft length, mounts, etc.

So, what they are looking for is a full set of suspension to pull the information from to build a new set of AMR coilover's for these cars.

As a sponsored driver in the Lancer community, I was asked if I had access to or knew someone that did have access to, a set for this engineering effort. I don't personally know anyone with an 09, so I posted here.

I don't know and can't say what the end pricing will be but for the EVOs, the complete setup includes Linear Spring rates, 8 way adjustability and a LIFETIME warranty all for around $1799 bucks. Lifetime... that means no more costly rebuilds. My DMS cost me $500 bucks a corner every year for Rebuilds alone! Not to mention the $5000 initial purchase price.

My AMR Suspension ran just under $1700 and is sooooo sweet. Check it out:

So again, we are looking to bring these to the Ralliart crowd and need a set of stickers to ensure the finished coilovers are application specific, not just some modified universal application like so many other coil over kits out there.

You WILL feel the difference.

Thanks for the emails and help.

Scott

bye2u · Jun 8, 2009, 10:04 AM

they look the goods!

hope someone takes up this opportunity... so many people asking for coilovers and some companies are offering to develop some yet no one has stepped up >.< .. wish i was in the US..

jazket · Jun 8, 2009, 10:23 AM

what's it that needs 2 be done?

lamsimon · Jun 8, 2009, 12:09 PM

where in vancouver u r located at?

RallyDSM · Jun 8, 2009, 08:35 PM

Vancouver, WA, USA

Just on the border between Oregon and Washington. I see you are in Canada.

Close, but not THAT close

Quote:

Originally Posted by jazket

what's it that needs 2 be done?

Specifically, the internal shaft length, externally, the mounting locations and the range of motion, I'd imaging. I'm not the engineer. I just test them

What I do know is that building them specifically to the requirements of the specific vehicle results in increased life and reliability. Generic or "close" shaft lengths often result in them being over extended or bottoming out and damaging or destroying the internals, valving, retainers and other bits. So getting them just so, while many companies don't do it, is why AMR can extend the Lifetime Warranty that they do.

Scott

jRox · Jun 9, 2009, 03:07 PM

Niiice. Glad AMR engineering is willing to make a set specifically for the 09 RA.

I'd be all over this if it were in the NJ/NY area. Someone step up!

chris1012008 · Jul 15, 2009, 11:10 AM

Would you possible know the closest date to when the could be bought?

joeskrobacz · Jul 31, 2009, 11:42 AM

I Just put lowering springs on my 09 Raillart. So i have the stock springs if they would like to purchase them.

jazket · Jul 31, 2009, 02:12 PM

Any news on this??????

how's it going?

jRox · Oct 28, 2009, 08:56 PM

I spoke to AMR Engineering. They're still looking for a local 09 RA. Anyone up for it?