New Evo Spoiler

Tpriem10 · May 2, 2009, 02:04 PM

I just picked up this wing de5f_1.jpg As you can tell it needed some work. The first thing i did was take a razor blade and scrape away all of the white spots and loose clear coat.
Next i wet sanded the whole top side with 800 grit sand paper. It didnt take any clear coat off but rather smoothes it all out. The whole wet sanding took about 3 hours total time. I worked bit by bit.
THe next thing i did was clean the top of the spoiler off and got it ready for painting. I went to auto zone and picked up a spray called Dulpi Color High PErformance Wheel Coating. It sprays clear and dries clear. It only cost $5.xx too. I put about 8 layers down and waited 30 min in between. This is what my new spoiler looks like. Thanks
DSC05501.JPG
DSC05502.JPG

Bggstin · May 2, 2009, 02:08 PM

Have you wet sanded the clear coat in the final pictures? It didn't look like it was, or do you plan on doing it?

It looks like things turned out pretty well though.

Tpriem10 · May 2, 2009, 06:01 PM

I didnt wet sand the spoiler in the new pics but it has been done since then. I am putting it on my car tonight. I did all the work by myself and i am only 16. I hope it looks as good as i want it to lol Thanks

Tpriem10 · May 2, 2009, 06:02 PM

It looks a lot better in person then it does in the pics. It looks like factory carbon fiber again.

flatline16 · May 2, 2009, 06:53 PM

turned out nice for duplicolor.

berns15 · May 2, 2009, 06:56 PM

nice

MyTSi · May 2, 2009, 07:15 PM

good job

Pingar · May 2, 2009, 08:34 PM

Looks a whole lot better.

father04co · May 2, 2009, 08:48 PM

nice work!, i have a similar story, check my topic it might interest you, http://forums.evolutionm.net/lancer-...re-making.html

Tpriem10 · May 2, 2009, 08:57 PM

Thanks for the comments everyone. I need a photoshoot now lol Father04co that looks really nice. You did an awesome job.